How to use

Ensure all spa equipment is working properly. Backwash the filter system following the manufacturer’s directions. Adjust pH to between 7.2-7.6. When using other products as outlined in directions for this product, always follow directions on those products. 

Feeder: Fill spa bromine feeder with this product and adjust feeder following manufacturer’s directions to yield bromine residual between 2-4 ppm in residential spas and 4-6ppm in commercial spas. Check feeder regularly and add additional product as needed to maintain the bromine residual. The pump and filter should be operated for at least three hours every day whether the spa is used or not. Do not heat water above the spa manufacturer’s recommended maximum temperature. Keep the spa free of leaves and other debris. To maintain clear, clean water and ensure the performance of your spa chemicals, spas should be drained and refilled with fresh water every 60 days in residential spas or a minimum of every 7 days in commercial spas. 

Floater or Skimmer: Place three (3) tablets per 200 gallons in a skimmer basket or floater that contain no other chemical product or chemical residue. Do not allow this product to come in direct contact with the surface of the spa or damage to the spa surface may result. A sufficient number of tablets must be used to maintain a bromine residual of 2-4 ppm in residential spas. Normally, three (3) tablets for every 200 gallons, or fraction, of water will be sufficient to maintain proper bromine levels. The pump and filter should be operated for at least three hours every day